Bottle Mineral Water Filling Machine Installation and Commission Steps
The bottled mineral water filling machine is a self-priming filling of the leather tube, and the leather tube is placed in the material storage barrel. Under the action of the cylinder pulling the piston rod, the material enters the metering cylinder through the self-suction tube and the three-way lower check valve, and then The piston pushes the piston to push the material out, and the material enters the container through the three-way upper check valve, the leather tube and the filling head, and the amount of the filling is determined by the magnetic control switch controlling the stroke of the cylinder.
Installation and commissioning of bottled mineral water filling machine
1. Install and then debug, read the instructions carefully before commissioning, and prepare the tools used.
2. After the installation, brushing machine and the rinsing machine are installed, the filling track and the bottle receiving tray are leveled, the liquid storage tank is filled with materials, and all the electrical switches are in the closed position.
3. Fill the container into the tool box, connect the external power supply, the power socket must be a three-pin socket, and have a reliable grounding wire to prevent the chassis from leaking power, turn the machine power switch to ON, and the power indicator light.
4. The